SmartLife Videodeurbel | Wi-Fi | Batterij Gevoed | HD 720p | Cloud Opslag (optioneel) / microSD (niet inbegrepen) | IP54 | Met bewegingssensor | Nachtzicht | Wit

Merk: Nedis
Nedis-nummer: WIFICDP20WT
EAN nummer: 5412810331567

Met deze Nedis SmartLife videodeurbel weet je altijd of er iemand aan de deur staat, ongeacht waar je bent. Zodra iemand naar je deur loopt of aanbelt, weet jij, dankzij de bewegingsdetectie en een pushbericht op je telefoon, altijd wie er aan de deur staat. Vervolgens kun je via de app direct een videogesprek beginnen met de aanbeller. Vraag bijv. aan de koerier het pakketje bij de buren af te geven of vertel je afspraak dat je over 5 min thuis bent - dit alles waar je ook bent. Ook is deze videodeurbel extra beveiliging voor je huis. Je kunt namelijk overal ter wereld, als je je smartphone en een internetverbinding hebt, zien wie er jouw huis bezoekt. Doordat de HD camera (720p) nachtvisie ondersteunt en een kijkhoek van 100° heeft zie je 24 uur per dag wie er aan je deur staat. Pushmelding gemist of geen tijd om te kijken wie er aan je deur staat? Er wordt een foto opgeslagen in de cloud en, als je er een hebt, op de microSD kaart, dus je kunt de beelden terugkijken waar en wanneer het jouw uitkomt. De deurbel is draadloos, wordt geleverd met een oplaadbare batterij en is eenvoudig te monteren en te installeren. Laad de videodeurbel op via de micro-USB-poort (geen kabel inbegrepen). Aan te raden is om de deurbel uit te breiden met de Nedis deurbel-ontvanger (WIFICDPC10BK) zodat je de bel ook hoort wanneer je smartphone uit staat.

Kenmerken

• Inclusief oplaadbare batterij voor een 100% draadloze videodeurbel en snelle installatie,
• De batterij gaat tot wel 2 maanden mee in standby-mode / een volle batterij staat gelijk aan 200 opnames,
• Stuurt automatisch pushnotificaties naar je smartphone wanneer beweging wordt gedetecteerd of wanneer er wordt aangebeld,
• Bewegingsdetectie kan ook worden uitgezet (handig als je deur direct aan de straat grenst),
• Tweezijdige communicatiefunctionaliteit - praat en luister met degene die voor de deurbel staat, 
• HD-opnames (720p) met digitale zoomfunctionaliteit voor een nog gedetailleerder beeld
• Opnames worden opgeslagen op een microSD-kaart tot 128 GB (niet inbegrepen) - kijk de beelden terug waar en wanneer jij dit wil,
• Geïntegreerd in de Nedis® SmartLife app,
• Uit te breiden met de draadloze deurbelontvanger (WIFICDPC10BK - niet inbegrepen), zodat je de deurbel altijd hoort als je thuis bent, ongeacht waar je telefoon ligt.

Inhoud verpakking

Videodeurbel Muurbeugel Installatiemateriaal Snelstartgids

Veel gestelde vragen

Wij hebben voor u de volgende vragen gevonden in het Engels
Can I adjust the volume and tone of the WIFICDPC10BK wireless chime?
Unfortunately this battery powered doorbell does not have this option. The wired WIFICDP10GY doorbell does allow you to change the tone and volume.
I can't find the doorbell settings menu to pair the gong.
Unfortunately the manual that comes with the doorbell is incorrect. We were too late to change it when we found out but we did add a small extra manual on how to pair the gong. Move the gong as close to the doorbell as possible. Give the gong's button a short press: the LED starts to blink Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired. It is not possible to change the tone and volume on this doorbell model.
How do I pair the gong to the WIFICDP20xx doorbell?
1. Place the gong as close to the doorbell as possible during the installation. 2. Press and hold the button on the chime for 5 seconds , led on the chime flashes. 3. Shortly press chime reset button. The led will start blinking slowly. 4. Hold doorbell button until the Led on the chime stops flashing 5. Push the doorbell button to test it 6. Relocate the chime to the desired location 7. Push doorbell again to test the range
The camera does not recognise the QR code
Please try the EZ mode installation Reset the camera by holding down the reset button until you hear the sound Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB) The videostream is at moment not working with Google/NEST Hub.
Can I use a really fast ultra/extreme/Evo/pro/canvas memory card in this device?
These type of cards can have compatibility issues and we recommend you use a regular speed Class 10 card.